Perfect results

Instructions for optimal use

Here you will find general instructions for use as well as specific guidance for the TAN, MOISTURISE, SUN and BODY Glow products. Find out everything you need to know about optimal application and discover useful dos and don'ts for perfect skincare results.

Are you using the IONIQ Skincare system for the first time? Check this out first:

Initial use

You will find specific application tips for our cosmetic products here:

General use

Before use

Screw your cartridge into the sprayer until it is securely in position.
Switch on the sprayer by briefly pressing the on/off button.

During use

Maintain a gap of 20–40 cm between the sprayer and the skin. This is essential to allow the spray to disperse and achieve even results.
Keep both the trigger buttons depressed and spray slowly and evenly over the skin.
Install the IONIQ Skincare app to find individual spray times and tutorials. The app offers support during the spraying process and determines the quantity to apply depending on the desired results.

After use

Do not rub the product in afterwards by hand. IONIQ Skincare ensures even distribution across the skin without further intervention.
Switch off the device after use.
Unscrew the cartridge and replace the lid after use.
The CLEAN cartridge should be used to clean the IONIQ ONE sprayer twice a week and after every TAN application. Here you will find instructions on cleaning your sprayer and helpful solutions in case of problems.

Helpful hints

If you are using the spray on someone else, make sure you touch them, for example by placing your hand on their arm. Otherwise, the Magnetic Skin Technology will direct the droplets to your own skin rather than the other person.
Always switch off the sprayer before changing the cartridge to make sure any remaining liquid is pumped back into the cartridge from the sprayer.

Instructions for TAN

Before use

Before application, prepare the skin with an exfoliating mitt, an oil-free shower peel or our BODY Scrub.
After exfoliation, clean the skin carefully using a mild soap.
Treat any dry areas of skin such as elbows, knees or feet with a moisturising body lotion and allow this to be absorbed.

During use

Screw in your TAN cartridge and switch on the sprayer by briefly pressing the on/off button.
To spray the product, keep both the trigger buttons pressed down.
Please make sure you always keep a gap of 20–40 cm between the sprayer and skin while spraying. This is essential to allow the spray to disperse and achieve even results.
Use TAN on surfaces that are easy to clean (e.g. the shower).
For individual spray times and tutorials, please use the IONIQ Skincare app.
Start in the centre of the relevant body section and move the sprayer over this starting point.
Apply the spray several times evenly across the body to achieve optimal tanning. For a darker shade, apply a second layer or use IONIQ TAN Dark.

After use

Wash your hands carefully.
To remove any tanning residue from your IONIQ ONE sprayer, screw in the IONIQ CLEAN cleaning cartridge and spray for 5 seconds into a washbasin or towel.
Leave the product to absorb for at least 10 minutes before getting dressed. To ensure optimal tanning results, wear loose clothing for the next 8–10 hours to avoid rubbing against the skin.
Care for your skin daily with a moisturising body lotion to ensure your tan lasts as long as possible.

Instructions for MOISTURISE

Before use

Before use, the cartridge must be shaken well to mix the water-based formula with the oils, ensuring a smooth result on the skin.
Do not use MOISTURISE Soft on open wounds or damaged skin.

During use

Screw in your TAN cartridge and switch on the sprayer by briefly pressing the on/off button.
To spray the product, keep both the trigger buttons pressed down.
Please make sure you always keep a gap of 20–40 cm between the sprayer and skin while spraying. This is essential to allow the spray to disperse and achieve even results.
For individual spray times and tutorials, please use the IONIQ Skincare app.
MOISTURISE Soft is best applied after showering and drying off, when the skin is warm and slightly damp.
If desired, the product can also be used on the face, avoiding the eye area.

After use

To remove any tanning residue from your IONIQ ONE sprayer, screw in the IONIQ CLEAN cleaning cartridge and spray for 5 seconds into a washbasin or towel.
MOISTURISE Soft can be used several times a week, or twice daily for very dry skin.

Instructions for SUN

Before use

Make sure your skin is dry before applying the product.

During use

Screw in your SUN cartridge and switch on the sprayer by briefly pressing the on/off button.
To spray the product, keep both the trigger buttons pressed down.
Please make sure you always keep a gap of 20–40 cm between the sprayer and skin while spraying. This is essential to allow the spray to disperse and achieve even results.
For individual spray times and tutorials, please use the IONIQ Skincare app.

After use

The product is waterproof and offers instant protection.
To prevent sunburn, regular spraying is important. You should reapply the product at least every two hours to ensure adequate sun protection.
To remove any residue from your IONIQ ONE sprayer, screw in the IONIQ CLEAN cleaning cartridge and spray for 5 seconds into a washbasin or towel.

Instructions for BODY Glow

Use

Screw in your BODY Glow cartridge and switch on the sprayer by briefly pressing the on/off button.
To spray the product, keep both the trigger buttons pressed down.
Please make sure you always keep a gap of 20–40 cm between the sprayer and skin while spraying. This is essential to allow the spray to disperse and achieve even results.
For individual spray times and tutorials, please use the IONIQ Skincare app.

After use

To remove any residue from your IONIQ ONE sprayer, screw in the IONIQ CLEAN cleaning cartridge and spray for 5 seconds into a washbasin or towel.