Spring Sale | Save 20%

30 Tage Geld zurück

Perfect results

Instructions for optimal use

Here you will find general instructions for use as well as specific guidance for the TAN, MOISTURISE, SUN and BODY Glow products. Find out everything you need to know about optimal application and discover useful dos and don'ts for perfect skincare results.

Are you using the IONIQ Skincare system for the first time? Check this out first:
Initial use

General use

Load video:

Before use

  • Screw your cartridge into the sprayer until it is securely in position.
  • Switch on the sprayer by briefly pressing the on/off button.

During use

  • Maintain a gap of 20–40 cm between the sprayer and the skin. This is essential to allow the spray to disperse and achieve even results.
  • Keep both the trigger buttons depressed and spray slowly and evenly over the skin.
  • Install the IONIQ Skincare app to find individual spray times and tutorials. The app offers support during the spraying process and determines the quantity to apply depending on the desired results.
Load video:

After use

  • Do not rub the product in afterwards by hand. IONIQ Skincare ensures even distribution across the skin without further intervention.
  • Switch off the device after use.
  • Unscrew the cartridge and replace the lid after use.
  • The CLEAN cartridge should be used to clean the IONIQ ONE sprayer twice a week and after every TAN application. Here you will find instructions on cleaning your sprayer and helpful solutions in case of problems.

Helpful hints

  • If you are using the spray on someone else, make sure you touch them, for example by placing your hand on their arm. Otherwise, the Magnetic Skin Technology will direct the droplets to your own skin rather than the other person.
  • Always switch off the sprayer before changing the cartridge to make sure any remaining liquid is pumped back into the cartridge from the sprayer.

Instructions for IONIQ BODY Scrub

Before use

  • IONIQ BODY Scrub should be used in the shower on damp skin.
  • Particularly suitable for rough or dry skin.
  • Do not apply to open skin areas or irritated skin.
  • Can be used on the face, but test on a small area first if you have sensitive skin.

During use

  • After cleansing the skin, apply a small amount (2-3 walnut-sized portions) to damp palms.
  • Massage the scrub into the skin using gentle, circular movements.
  • Take a little more time, especially on rough areas such as elbows, knees or heels, and leave on for a few minutes to allow the nourishing ingredients to work their magic.
  • Rinse thoroughly with warm water and gently dry the skin.
  • For optimum results, apply IONIQ TAN or MOISTURISE immediately afterwards.

After use

  • The skin feels smoother and softer and is optimally prepared for further care.
  • Regular use (2-3 times a week; once a week for sensitive skin) is recommended for long-lasting skin care.
  • Thoroughly rinse off peeling residues from the shower to avoid slipping.

Instructions for TAN

Load video:

Before use

  • Before application, prepare the skin with an exfoliating mitt, an oil-free shower peel or our BODY Scrub.
  • After exfoliation, clean the skin carefully using a mild soap.
  • Treat any dry areas of skin such as elbows, knees or feet with a moisturising body lotion and allow this to be absorbed.

During use

  • Insert your IONIQ TAN cartridge and switch on the sprayer by briefly pressing the on/off switch.
  • Press and hold both trigger buttons to spray.
  • Please ensure that you always maintain a distance of 20-40 cm between the sprayer and your skin during the spraying process.
  • Only in this way can the spray jet fan out optimally and achieve an even result. please use IONIQ TAN on surfaces that are easy to clean (e.g. shower).
  • For customised spray times and tutorials, download the IONIQ Skincare app.
  • Start in the centre of the respective body part and pass over the starting point several times.
  • Spray evenly over the body several times to achieve an optimal tan. For a darker complexion, apply a second layer or use IONIQ TAN Dark or Extra Dark.

After use

  • Wash your hands thoroughly.
  • To remove any tanning residue from your IONIQ ONE Sprayer, twist in the IONIQ CLEAN cleaning cartridge and spray for 5 seconds in a washbasin or towel.
  • Leave the product to work for at least 10 minutes before getting dressed. To allow the tan to develop optimally, wear loose clothing for the next 8-10 hours to avoid friction on the skin.
  • Care for your skin daily with a moisturising body care product such as IONIQ MOISTURISE Soft for the longest-lasting tan possible.

Instructions for IONIQ MOISTURISE Tan Light

Load video:

Before use

  • Prepare the skin: Best used after showering on dry, cleansed skin.
  • Do not use on open skin areas or wounds.
  • For sensitive skin, test on an inconspicuous area before the first application.
  • Shake the cartridge: Shake well before each application so that the ingredients mix evenly.
  • Prepare the sprayer: If necessary, clean the sprayer with the IONIQ CLEAN cleaning cartridge. Then insert the MOISTURISE Tan Light cartridge.
  • Observe room conditions: The humidity should not exceed 80% to ensure optimum application with the IONIQ ONE Sprayer.

During use

1. Apply the product:

  • Hold the IONIQ ONE Sprayer about 20 - 40 cm away from your body.
  • Press and hold both trigger buttons simultaneously and spray the product evenly onto the skin.
  • No rubbing required - the product is absorbed by itself.

2. Allow to absorb:

  • Wait a few minutes until the skin is completely dry.
  • No rinsing required - the moisturising and tanning effect develops within 24 hours.

After use

  • Avoid contact with water: For an even tanning result, do not allow the skin to come into contact with water for at least 4-6 hours.
  • Avoid tight clothing: Avoid wearing tight clothing immediately after application until the product has been fully absorbed.
  • Intensify the tan: The application can be repeated regularly depending on the desired degree of tanning.

Instructions for MOISTURISE Soft

Load video:

Before use

  • Before use, the cartridge must be shaken well to mix the water-based formula with the oils, ensuring a smooth result on the skin.
  • Do not use MOISTURISE Soft on open wounds or damaged skin.

During Use

1. Apply the product:

  • Hold the IONIQ ONE Sprayer about 20 - 40 cm away from the body.
  • Press and hold both trigger buttons simultaneously and spray the product evenly onto the skin.
  • No rubbing required - the product is absorbed by itself.

2. Allow to absorb:

  • Wait a few minutes until the skin is completely dry.
  • The product leaves no residue and immediately leaves the skin feeling supple.

After use

  • Combine additional care: After application, IONIQ GLOW can be applied as required for an additional glow effect or IONIQ TAN for a tan.
  • Regular use: MOISTURISE Soft can be used daily or twice daily as required, especially for dry skin.

Instructions for SUN

Load video:

Before use

  • Make sure your skin is dry before applying the product.

During use

  • Screw in your SUN cartridge and switch on the sprayer by briefly pressing the on/off button.
  • To spray the product, keep both the trigger buttons pressed down.
  • Please make sure you always keep a gap of 20–40 cm between the sprayer and skin while spraying. This is essential to allow the spray to disperse and achieve even results.
  • For individual spray times and tutorials, please use the IONIQ Skincare app.

After use

  • The product is waterproof and offers instant protection.
  • To prevent sunburn, regular spraying is important. You should reapply the product at least every two hours to ensure adequate sun protection.
  • To remove any residue from your IONIQ ONE sprayer, screw in the IONIQ CLEAN cleaning cartridge and spray for 5 seconds into a washbasin or towel.

Instructions for BODY Glow

Load video:

Use

  • Screw in your BODY Glow cartridge and switch on the sprayer by briefly pressing the on/off button.
  • To spray the product, keep both the trigger buttons pressed down.
  • Please make sure you always keep a gap of 20–40 cm between the sprayer and skin while spraying. This is essential to allow the spray to disperse and achieve even results.
  • For individual spray times and tutorials, please use the IONIQ Skincare app.

After use

  • To remove any residue from your IONIQ ONE sprayer, screw in the IONIQ CLEAN cleaning cartridge and spray for 5 seconds into a washbasin or towel.

Money-back guarantee

Test IONIQ ONE at your leisure for 30 days

Free delivery + returns from £39

Shipping in 5-7 working days

Secure payment methods

such as Credit Card and PayPal